Where to buy silicone sealant in Accra, and which one to choose
Short answer: you can buy silicone sealant at TCP’s showrooms in East Legon and Spintex in Accra, and in Kumasi. For baths, showers, basins and sanitary fittings, choose an acetoxy silicone such as TCP Multi-Purpose Silicone or ENFIX Silicone. For joints and cracks you will paint over, choose TCP Acrylic Silicone, a paintable siliconized acrylic.
The sealants and adhesives TCP sells
| Product | Type | Pack | Colour | Listed uses |
|---|---|---|---|---|
| TCP Multi-Purpose Silicone | Acetoxy-cure silicone | 290 g cartridge (270 g net) | Clear, white or black; confirm availability | Baths, showers, basins and sanitary fittings; selected aluminium, metal, PVC trim and laminate joints |
| ENFIX Silicone | Acetoxy-cure silicone | 270 g cartridge (250 g net) | Clear, white or black; confirm availability | The same uses as above |
| TCP Acrylic Silicone | Siliconized acrylic, water-based | 485 g cartridge | White | Joints around timber and metal window and door frames; cracks in brickwork, stone, plaster and concrete before painting |
| TCP Liquid Nail | Acrylic construction adhesive | 300 ml cartridge | White; confirm availability | Fixing wall cladding to internal walls or timber battens, stair nosing; needs at least one absorbent surface |
| TCP High Tack Power Adhesive | High-tack adhesive | Cartridge | See data sheet | Mounting, installation and repair; 300 kg holding power as stated on the pack |
To apply cartridges, TCP sells a metal silicone gun and a plastic silicone gun.
Silicone or acrylic?
Silicone stays flexible and is the usual choice where a joint gets wet, but ordinary paint does not hold on it. Acrylic sealant is paintable once fully cured, so it suits joints in walls and around frames that will be painted. A longer comparison is in acetic silicone, neutral silicone or acrylic sealant.
For a seal that lasts
- Surfaces must be clean, dry and free from dust, loose coatings and old sealant.
- Do not use these products on bitumen, asphalt or materials that release oils, solvents or plasticisers.
- Acetoxy silicone is applied between +5°C and +40°C. It forms a skin in about 25 minutes and cures about 2 mm per day at 23°C and 50% humidity, so a thick bead needs several days to cure through.
- Check that both surfaces are compatible with the product before you start; the technical sheet on each product page gives the details.
Where to buy in Accra and Kumasi
- East Legon head office, Accra: 98 La-Bawaleshi Road, East Legon. Phone +233 30 254 9501 or +233 59 494 9999. Directions
- Spintex branch, Accra: Flower Pot, Spintex. Phone +233 59 494 4449. Directions
- Kumasi branch: Ahinsan, Kumasi. Phone +233 59 494 9499. Directions
All three are open Monday to Friday 08:30–17:00 and Saturday 09:00–14:00, and closed on Sunday. You can also message us on WhatsApp at +233 59 494 9999 or use the enquiry form. Product pages describe the products and their published specifications; they are not price lists or live stock. Please confirm prices, pack sizes and availability with our team.
Common questions
Where can I buy silicone sealant in Accra?
At TCP’s East Legon head office, 98 La-Bawaleshi Road, and at the Spintex branch at Flower Pot, Spintex. In Kumasi, at the branch in Ahinsan. All three are open Monday to Friday 08:30–17:00 and Saturday 09:00–14:00. WhatsApp: +233 59 494 9999.
Which silicone should I use for a bathroom or shower?
An acetoxy silicone: TCP Multi-Purpose Silicone or ENFIX Silicone. Their data sheets list baths, showers, basins and sanitary fittings, in clear, white or black (confirm availability).
Can I paint over silicone?
Ordinary paint does not hold on silicone. For joints that will be painted, use TCP Acrylic Silicone: it can be painted with most conventional façade paints after full curing. Test the paint first.
Is silicone a glue?
No. Silicone seals joints; it is not a structural adhesive. For bonding, TCP sells Liquid Nail construction adhesive and High Tack Power Adhesive.
Do you sell silicone guns?
Yes: a metal silicone gun and a plastic silicone gun, both for standard cartridges.
How long does silicone take to dry?
TCP’s acetoxy silicones form a skin in about 25 minutes and cure about 2 mm per day at 23°C and 50% relative humidity. Keep the joint dry and untouched until it has cured.