Enfleks Waterproofing Coating (Fibre-Reinforced)

TCP Enfleks Fiber is a fibre-reinforced acrylic waterproofing coating for roofs, walls, and compatible building surfaces. Its white, elastic, breathable finish helps resist water penetration, UV rays, and mild chemicals.
Specifications
Colour: white; confirm availability
Pack: plastic bucket, 18 kg gross
Minimum dry film / system consumption:
Ground moisture: 2 mm / 2.5 L/m²
Temporary water pressure: 3 mm / 4.0 L/m², with mesh
Continuous water pressure: 4 mm / 5.5 L/m², with mesh
Application temperature: +5°C to +35°C; avoid rain, direct sun and very hot weather
Hardening time: 24 hours
Full drying: 7 days minimum; wait at least 1 week before backfilling
Shelf life: 12 months
Applications / uses
Apply to a sound surface free from dirt, oil and dust. Prime with product diluted 50% with water, by brush or roller. Apply at least two coats; apply the second once the first is sufficiently dry. Under water pressure, embed alkali-resistant glass-fibre mesh and mat between the first and second coats. Protect from frost for at least three days. Allow at least seven days for full drying and before backfilling. Clean tools with water immediately after application.



